TL;DR: Yes, double glazing can reduce noise, but how much depends on how the window is built. According to the Australian Glass and Window Association (AGWA), a standard double-glazed unit with a small air gap does not substantially improve sound insulation on its own. Laminated glass, panes of different thicknesses, a wider gap and tight seals make the real difference. A 10 dB drop sounds roughly half as loud. Eltham Glass in Diamond Creek can assess your windows and recommend the right setup.
Does double glazing reduce noise? Yes, but the result depends on the glass, the gap and the seals. Double glazing helps most with voices and higher-pitched sounds, and less with low rumbles.
As family-owned glaziers in Diamond Creek, Eltham Glass explains what actually works, so you can choose a setup that suits the noise you hear and avoid paying for a result you will not notice.
In this article
Does Double Glazing Reduce Noise? The Short Answer
How Much Noise Reduction Does Double Glazing Provide?
What Affects How Well Double Glazing Blocks Noise?
Which Noises Does Double Glazing Block Best?
Why Seals and Window Type Matter
When Double Glazing Is the Right Noise Fix
FAQs
Want a Quieter Home? Get Advice on Double Glazing in Diamond Creek
In this article
- Double glazing can reduce noise, but a standard unit with a small air gap gives only a modest improvement on its own.
- Voices and higher-pitched sounds are easier to reduce than deep rumbles from traffic and aircraft.
- Windows carry an Rw rating, and a 10 dB reduction sounds roughly half as loud.
- Laminated glass, panes of different thicknesses, a wider gap and good seals all lift noise performance.
- Gaps around the frame and the way a window opens can let sound through, so the whole window matters, not just the glass.
- Eltham Glass can assess your windows and advise on the right setup for your noise problem.
Does Double Glazing Reduce Noise? The Short Answer
Double glazing reduces noise by placing a sealed air gap between two panes of glass. The gap slows the sound travelling through the window, so you hear less of it indoors. It works best on voices and higher-pitched sounds, and less well on low rumbles such as traffic.
The Australian Government’s Your Home guide says sealed double glazing reduces medium to high frequency noises, such as the human voice. For low-frequency noise, such as traffic and aircraft, the same guide points to thicker glass, preferably double-glazed with a wide gap between the panes.
There is a catch. Ordinary double glazing with a standard gap of about 12mm does not substantially improve acoustic performance. Noise performance depends on how the unit is built, not just on having two panes.
How Much Noise Reduction Does Double Glazing Provide?
Noise reduction is measured in decibels (dB), and windows are given an Rw rating. Rw is a single number that shows how well a window blocks airborne sound, and a higher number means better insulation. Rw+Ctr adjusts that figure for low-frequency sounds such as road traffic, according to AGWA.
AGWA’s fact sheet explains that each 10 dB increase in sound corresponds to a perceived doubling of loudness. In practice, a 10 dB drop sounds roughly half as loud.
AGWA’s laboratory examples show how much the build matters:
- 4mm single pane: Rw 32
- Standard 4-12-4 double-glazed unit: Rw 30, slightly lower because of a resonance dip at lower frequencies
- Double-glazed units with laminated glass: Rw 38 to 42
In these examples, the gap between a basic double-glazed unit and a well-specified one is far bigger than the gap between a single pane and a basic double-glazed unit.
These are test examples, not promises. AGWA notes that the rating of the complete window matters more than the glass alone, because gaps and seals can lift or lower the result.
What Affects How Well Double Glazing Blocks Noise?
Five things decide how much noise a double-glazed window blocks: the glass thickness, the type of glass, the gap between the panes, the frame and the seals. Changing one can lift performance, but a window performs only as well as its weakest part.
- Glass thickness: According to AGWA, thicker glass blocks more noise, especially low-frequency sound such as traffic.
- Laminated glass: AGWA says laminated glass performs slightly better than standard glass of the same thickness. Your Home adds that thick laminated glass is effective at reducing noise but offers little thermal performance.
- Panes of different thicknesses: AGWA explains that using two different thicknesses in one unit blocks a wider range of frequencies.
- Air gap: AGWA recommends a gap of at least 100mm for better sound insulation, as in secondary glazing. Your Home warns that large gaps allow convection, which reduces insulation.
- Frame and seals: These decide whether the glass can do its job, as the section on seals below explains.
Which Noises Does Double Glazing Block Best?
Double glazing handles voices and higher-pitched sounds better than deep, low-frequency noise. Traffic rumble, trains and aircraft pass through glass more easily, so they usually call for heavier or laminated glass and a wider gap. Match the glazing to the noise you hear most.
- Voices and everyday chatter: Sealed double glazing helps, according to Your Home.
- Traffic, aircraft and other low rumbles: Look for thicker or laminated glass, a wider gap and a rating that includes the Ctr adjustment. AGWA notes that Ctr accounts for road traffic noise.
- A mix of both: Combine double glazing with laminated glass, and ask for the tested rating of the whole window.
Why Seals and Window Type Matter
Sound travels through any gap, however small. A well-made double-glazed unit in a leaky frame still lets noise in, so seals and the way a window opens often matter as much as the glass.
AGWA says sliding and double-hung windows need clearance between the sash and the frame, which makes them harder to seal. Awning and casement windows use compression seals, which generally perform better. AGWA also notes that gaps around the frame and penetrations such as vents and downlights can raise indoor noise.
Your Home describes sealing gaps around windows as probably the most effective first step for noise control. Before you replace anything, check these:
- Look for worn or missing seals on opening sashes.
- Check for gaps between the window frame and the wall.
- Consider hinged windows over sliding ones where noise is a concern.
- Ask for the tested Rw rating of the complete window.
When Double Glazing Is the Right Noise Fix
Double glazing is a strong choice when you want less noise and better temperature comfort together. It is less suited as the only fix for heavy traffic rumble or leaky frames. A quick look at your noise source and your windows shows which route makes sense.
Eltham Glass’s double glazing is energy efficient as well as insulating, so the same upgrade can help with heating and cooling. Here is how the options usually line up:
- Noise from voices and general street activity, plus a warmer home: Double glazing is a good fit.
- Heavy traffic or aircraft: Ask about laminated glass, different pane thicknesses or a wider gap.
- Leaky or worn windows: Seal or repair first, then reassess.
“Double glazing is not a one-size-fits-all fix for noise. The glass, the gap and the seals all play a part, so we start by asking what you are hearing and where it comes from. That tells us whether double glazing, laminated glass or both is the right answer.”
– Ryan, Eltham Glass
FAQs
Can I add double glazing to my existing windows?
In many cases, yes, but not every window suits double glazing. Eltham Glass assesses your windows and suggests an alternative if double glazing is not the best fit.
Does double glazing also reduce heating and cooling costs?
It can. Double glazing helps manage heat transfer, which may reduce the energy you use for heating and cooling. Eltham Glass can talk you through the options for your home.
What noise rating should I ask a supplier for?
Ask for the Rw rating of the complete window, not just the glass. If road noise is the problem, ask for Rw+Ctr. AGWA says whole-window ratings matter more than glass values alone.
Is double glazing available for businesses?
Yes. Eltham Glass supplies double glazing for homes and commercial premises across Melbourne and the Diamond Valley.
How long does double glazing installation take?
It depends on the size of the windows or doors, the type of job and whether repairs are needed. Eltham Glass confirms timing after assessing your windows.
Want a Quieter Home? Get Advice on Double Glazing in Diamond Creek
Not sure whether standard double glazing is enough for your noise problem? Tell us what you hear, which rooms bother you most and what your windows are like. We will give you honest advice before you spend anything.
Explore Double Glazing Diamond Creek quotes and options with Eltham Glass, or visit us in-store at 49 Chute Street, Diamond Creek.




